Getting Started with Your GPIB-ENET and the GPIB Software for Windows NT and Specifications
 |
| Note: This document is not the most recent edition. Search to find out if a more recent edition is available. |
|
| Edition Date: |
January 1997 |
| Part Number: |
321368A-01 |
|
This manual contains instructions to help you install and configure the
National Instruments GPIB-ENET hardware and the GPIB software for
Windows NT. The NI-488.2M software is intended for use with
Microsoft Windows NT version 3.51 or higher.
This manual assumes that you are already familiar with Windows NT and
with TCP/IP networks, and that your computer is connected to an
Ethernet network. Before you can use the driver software for the
GPIB-ENET, you must already have a Windows Sockets (WinSock)
Interface, version 1.1 or higher, installed. Microsoft provides a WinSock
Interface with Windows NT. Additionally, you can use a WinSock
Interface purchased from another network vendor.
 |
View the document in Adobe Acrobat PDF format. (File size: 616 KB) |
Right-click the link above and select Save Link/Target As to download the document to your computer.
