6110E/6111E Calibration Procedure
 |
| Note: This document is not the most recent edition. Search to find out if a more recent edition is available. |
|
| Edition Date: |
November 1999 |
| Part Number: |
370050A-01 |
|
The following procedure for verifying and calibrating the National
Instruments 6110E/6111E board contains three main sections:
• Calibration Overview—This introductory section tells you what
calibration is, why you should calibrate, and how often you should
do it.
• Equipment and Other Test Requirements—This section describes
what you need to do before you can calibrate your device, including an
overview of the test equipment, software, calibration functions, and
environment needed for calibration.
• Calibration Process Overview—This section provides detailed
step-by-step instructions for verifying and calibrating your device.
This document is intended for metrology labs. It does not cover
programming technique or compiler configuration because of the number
of programming languages and styles you can use to calibrate your module.
However, the National Instruments data acquisition driver, NI-DAQ, has
many online help files that contain compiler-specific instructions and
detailed function explanations. You can add these help files when you
install NI-DAQ on your calibration computer.
 |
View the document in Adobe Acrobat PDF format. (File size: 136 KB) |
Right-click the link above and select Save Link/Target As to download the document to your computer.
