LabVIEW 8.0 FPGA Module Help
 |
| Note: This document is not the most recent edition. Search to find out if a more recent edition is available. |
|
| Edition Date: |
October 2005 |
| Part Number: |
371599A-01 |
|
Software Revision Version: 8.0
Software version corresponds to the version of the application or driver software for this manual.
With the LabVIEW FPGA Module and LabVIEW, you can create VIs that run on National Instruments FPGA targets, such as Reconfigurable I/O (RIO) devices. FPGA targets contain a reconfigurable FPGA (Field-Programmable Gate Array) surrounded by fixed I/O resources. Depending on the specific FPGA target, fixed I/O resources can include analog and digital resources—such as analog-to-digital converters (ADCs) and digital-to-analog converters (DACs)—that you can control from the FPGA.
With the FPGA Module, you configure the behavior of the reconfigurable FPGA to match the requirements of a specific measurement and control system. The VI you create to run on an FPGA target is called the FPGA VI. Use the FPGA Module to write FPGA VIs. When you download the FPGA VI to the FPGA, you are programming the functionality of the FPGA target. Each new FPGA VI you create and download is a custom timing, triggering, and I/O solution.
View the document in HTML.
 |
Download the file in ZIP format. (File size: 891 KB) |
Right-click the link above and select Save Link/Target As to download the file to your computer. Unzip this file and follow any enclosed usage instructions.
