This installation guide describes how to connect the CB-27 connector
block.
With the CB-27 connector block, you can easily connect analog and digital
signals to the National Instruments 27-pin PCMCIA DAQ products and the
NI 4350 (PCMCIA).
The CB-27 consists of a connector block with 28 screw terminals and a
30-position right angle connector with ejector ears. Each screw terminal
corresponds to a pin number on the 30-position connector. Refer to your
DAQCard user manual for connector pinout information.
View the document in Adobe Acrobat PDF format. (File size: 73 KB)
Right-click the link above and select Save Link/Target As to download the document to your computer.
