Getting Started with Your GPIB-ENET/100 and NI-488.2 for Mac OS and Specifications
Edition Date:
November 2000
Part Number:
322878A-01
This manual contains instructions to help you install and configure
the National Instruments GPIB-ENET/100 and NI-488.2 for Mac OS. The
NI-488.2 software included in this kit is intended for use with Mac OS 8.1
or higher with at least 32 MB memory.
This manual assumes that you are familiar with the Mac OS and with
Ethernet and Internet networks, and that your Macintosh is connected
to an Ethernet network. This manual also assumes you have Open
Transport and TCP/IP installed on your Macintosh, which is required
before you can use the driver software for the GPIB-ENET/100.
View the document in Adobe Acrobat PDF format. (File size: 764 KB)
Right-click the link above and select Save Link/Target As to download the document to your computer.
