Getting Started with Your CAN Hardware and the NI-CAN Software for Windows 98/95
 |
| Note: This document is not the most recent edition. Search to find out if a more recent edition is available. |
|
| Edition Date: |
August 2000 |
| Part Number: |
370291A-01 |
|
Chapter 1 lists what you need to get started and optional equipment you can order, and briefly describes the CAN hardware and the NI-CAN software for Windows 98/95.Chapter 2 describes how to install and configure the CAN hardware and the NI-CAN software for Windows 98/95.Chapter 3 describes how to verify the hardware and software installation.Chapter 4 helps you get started with the NI-CAN software for Windows 98/95.Appendix A describes how to uninstall the CAN hardware and the NI-CAN software from Windows 98/95.Appendix B contains instructions to help you install your CAN interface if Windows has not detected it properly.Appendix C describes the cabling requirements for high-speed CAN hardware.Appendix D describes the cabling requirements for the low-speed CAN hardware.Appendix E describes the cabling requirements for the dual-speed CAN hardware.Appendix F describes the RTSI interface on your CAN board.Appendix G describes how to troubleshoot problems and answers some common questions.Appendix H describes the physical characteristics of the CAN hardware, along with the recommended operating conditions. This manual is in PDF format only, no hardcopy available.
 |
View the document in Adobe Acrobat PDF format. (File size: 823 KB) |
Right-click the link above and select Save Link/Target As to download the document to your computer.
