Connecting a National Instruments Ethernet Device to a Network other than 10Base-T or 100Base-TX Installation Guide
Note: This document is not the most recent edition. Search to find out if a more recent edition is available.
Edition Date:
May 2001
Part Number:
323127A-01
National Instruments Ethernet products, such as the GPIB-ENET/100
and Ethernet-to-Serial controllers, connect directly to 10Base-T and
100Base-TX networks. However, Ethernet can use a variety of physical
media. You can use an Ethernet media converter to transparently connect
the GPIB-ENET/100 or Ethernet-to-Serial device to Ethernet networks
other than 10Base-T/100Base-TX.
View the document in Adobe Acrobat PDF format. (File size: 236 KB)
Right-click the link above and select Save Link/Target As to download the document to your computer.
